|
|
REMOTE CONTROL UNITS
Burk
GSC3000
|
Model
|
Description
|
Price
|
|
GSC3000
|
The GSC3000 was
designed to meet the requirements of today's broadcast
facilities. Its modular approach allows you to remotely
monitor and control a single site with minimal requirements
or a large number of sites with extensive requirements.
Event-driven and time-based automatic command capabilities
allow you to trust your facilities to the GSC3000 twenty-four
hours a day, seven days a week. FOB: Littleton, MA. |
8 Channel: $2,935.00
16 Channel: $3,460.00
|
ARC-16
|
Model
|
Description
|
Price
|
|
ARC-16
|
The ARC-16 is a flexible and
expandable broadcast facility control system that offers
configuration options for stand-alone, full-time and multi-site
remote control and monitoring. Offering sixteen channels
each of metering, status and command, and expandable to
sixty-four channels per system, the ARC-16 meets broadcast
facility control needs in a wide range of environments.The
user-friendly front panel makes setup, monitoring and
control easy. AutoLoad
software is included for PC-based setup and configuration
archival. For automatic facility control with time-based
and event-driven routines, AutoPilot
software provides a full-featured solution for an
unlimited number of ARC-16 sites. FOB: Littleton, MA. |
$4,395.00
|
VRC2500
|
Model
|
Description
|
Price
|
|
VRC2500
|
Based on the GSC3000 platform,
the VRC2500 is a dial-up broadcast facility control system
that offers simplicity and ease of use without sacrificing
the powerful features needed for total facility management.
Sixteen channels of metering, status and command are ideal
for single-station outfits with modest site requirements.
Onboard macros and time-based functions allow the system
to monitor conditions and take control of situations automatically,
while PC, telephone and available Web-based interfaces
provide flexible means for operator management. The VRC2500
offers a built-in voice interface for dial-up, voice-prompted
telephone control. Alarms are reported to telephones,
pagers, or PCs running the included Lynx
software. With the optional Web
Interface, alarms can also be sent via email or SMS.
FOB: Littleton, MA. |
$3,295.00
|
Top
Davicom
MiniMAC and MAC
|
Model
|
Description
|
Price
|
| |
Davicom
MAC (Monitoring, Alarm & Control) systems
are optimized to solve the problems encountered by the
broadcasting and wireless telecommunications industries.
MAC units have been designed to operate in environments
where electric fields of over 10 Volts per meter are
present. They interface easily with other hardware and
sensors, and allow for a maximum of flexibility and
expandability. They provide real-time site information,
like transmitter function, antenna VSWR, auxiliary power
generation, night-time and tower lighting, temperature,
building entry, etc. |
|
|
MiniMAC
|
Features:
8 metering inputs; 16 status inputs; 2 audio monitoring
inputs; 8 relay or open collector outputs; 1 RS-232
port to communicate with other equipment. No true-RMS
converter option for direct audio measurements in dB.
1RU Size. FOB: Quebec, Canada. |
|
|
MAC
|
Features:
Expandable; 8 to 32 metering inputs; 16 to 64 status
inputs; 4 to 16 audio monitoring inputs; 16 to 64 relay
or open collector outputs; 4 to 16 RS-232 ports to communicate
with other equipment. Direct audio measurements in dB
using optional true-RMS converters. 2 RU size for 1
or 2 Input/Output Cards, 4 RU size for 3 or 4 Input/Output
Cards. FOB: Quebec, Canada. |
|
Top
Site Boss Series
SNMP-Link SL81
|
Model
|
Description
|
Price
|
|
SNMP-Link SL81
|
The SNMP-Link SL81 Remote
Site Manager provides an affordable way to avoid costly
facility downtime. Many of the factors that impact the
health of your network infrastructure - environmental
conditions and legacy equipment alarms - remain dangerously
outside the scope of your network management system
(NMS). The SNMP-Link SL81 enables you to easily integrate
these elements into your NMS. Additionally the SL81
gives you in-band and out-of-band remote access to other
devices located at your remote site. FOB: Seattle, WA |
CALL
|
EventSensor Type 2
Model |
Description |
Price |
|
Every day networks go down because
high temperature or humidity causes a network component
to fail. EventSensor modules enhance the monitoring capabilities
of the Asentria
Site
Boss,
Model SL81 Remote Site Manager units, which monitor
the EventSensor modules and transmit alarm messages via
modem, pager or network to your network management software.
FOB: Seattle, WA Available Type 2 Sensors:
Temperature Sensor ES-T
Temperature/Humidity Sensor
8 Dry Contact Closure Sensor ES-8C
8 Dry Contact Closure Sensor (Isolated) ES-8CI
8 Low-Current Relay Sensor ES-8R
8 Analog Voltage Sensor ES-8V
8 4-20mA Sensor ES-8M
4 Contacts & 4 Voltage Sensor (Non-Isolated) ES-4C4V
4 Contacts & 4 4-20mA Sensor (Non-Isolated) ES-4C4M
4 Contacts & 4 Low-voltage Relay Sensor ES-4C4R
4 Contact & 4 Isolated Voltage Sensor ES-4VI4C
4 Contact & 4 Isolated 4-20mA Sensor ES-4MI4C
8 Low-Voltage Solid State Relay Sensor ES-8SR
4 Contact & 4 Solid State Relay Sensor ES-4C4SR
|
CALL/EMAIL |
EventSensor ES-CCU32 and 64
Model |
Description |
Price |
ES-CCU64ct |
The new Asentria EventSensor
Contact Closure Unit ES-CCU is a peripheral sensing module
that expands the monitoring capabilities of an Asentria SNMP-Link
Model SL81 and SNMP-Link
Model SL61 (see
diagram). The EventSensor ES-CCU Contact Closure Unit
offers up to 64 contact closure inputs. Features: The
CCU reaches deep into your remote or unmanned equipment
rooms to monitor devices such as UPS units, air conditioning
units, MUXs and PBXs -- equipment that's ciritcal to your
business. When combined with the communications capabilities
of an Remote Site Manager, the CCU incorporates non-networked
devices into your network management system. FOB: Seattle,
WA |
CALL/EMAIL |
PowerBoss PB1
|
Model
|
Description
|
Price
|
|
PB1
|
Add DC power cycling to your
unmanned sites. The PowerBoss One is an accessory for
Asentria site monitoring products such as the SNMP-Link
SL81 that lets you control power to up to 8 pieces of
equipment located in your remote sites. The PB1 allows
you to power cycle both -48 and 24vdc equipment. When
a piece of equipment in your remote cabinet becomes unresponsive,
use the PB1 to cycle its power. When combined with an
SNMP-Link Remote Site Manager, the PB1 greatly improves
your ability to manage your facilities, especially in
unmanned rooms or after work hours. The PB1 provides eight
independent mechanical relays that each may be used to
switch -48VDC or +24VDC simultaneously. With the normally
closed contact and mechanical relays all equipment attached
to the PB1 continues to operate even if the PB1 is inoperative.
FOB: Seattle, WA |
CALL
|
Top
Sine Systems
RFC-1/B
|
Model
|
Description
|
Price
|
|
RFC-1/B
|
The minimum system consists
of the RFC-1/B control unit and one RP-8 Relay Panel (ordered
separately). The RFC-1/B is the "brain" of the
system and the RP-8 is the interface to outboard equipment.
The RP-8 provides eight channels of telemetry input and
control output. Multiple RP-8's can be used to expand
the system to a maximum of 64 channels. The RFC-1/B installs
completely at the transmitter site. Once in place, the
engineer or other authorized personnel can take readings
and make adjustments from nearly any telephone at any
location. The only requirement is for the telephone to
be able to produce DTMF tones, also known as Touch-Tones®.
RFC-1/B can perform tasks automatically based on the date
and/or the time of day such as pattern changes. Up to
80 timed events can be programmed in the system. the RFC-1/B
can perform tasks based on the condition of the transmitter
or another device. For instance, if the transmitter power
goes too high, the RFC-1/B can be programmed to adjust
the power down to a normal reading. FOB: |
$1,275.00
|
AFS-3
|
Model
|
Description
|
Price
|
|
AFS-3
|
The AFS-3 Audio Failsafe monitors
one or two audio signals and maintains a relay contact
closure as long as audio is present on at least one of
the two audio inputs. When no audio is present on both
inputs for a preset length of time, the relay contacts
open and remain open until audio is present on either
input again. To eliminate false triggering, audio on both
inputs must be silent for a preset length of time. The
length of this delay is adjustable from 30 seconds to
5 minutes in thirty second increments. Features: Internal
Sonalert audible alert--continuous or pulsing; Positive
delay adjustment via rotary switch; Delay adjust accessible
on rear panel; Logic-level alert voltage built in; Audio
detect mode. FOB: Nashville, TN |
$350.00
|
RAK-1 Intelligent Rack Adapter
|
Model
|
Description
|
Price
|
|
RAK-1
|
The Intelligent Rack Adapter
is the ultimate upgrade for the Remote Facilities Controller
model RFC-/B. This accessory package provides data communications
and printing capabilities, a battery backed power supply,
telephone line surge suppression and new front panel indicators
in a sleek new rack-mountable aluminum chassis. But perhaps
best of all, the RAK-1 is available as an upgrade for
existing RFC-1/B installations. This protects your investment
in the RFC-1/B Remote Facilities Controller that you already
own. Of course, if you don't already own an RFC-1/B, the
RAK-1 is offered on new systems, too. When ordered as
the RFC-1/RAK, we'll assemble and test the system at the
factory. FOB: Nashville, TN |
$750.00
|
Top
EMERGENCY BROADCASTING SYSTEMS
Gorman-Redlich
EAS-1 Emergency Alert System Encoder/Decoder for TV
|
Model
|
Description
|
Price
|
|
EAS1
|
EAS1 includes Alert messages
can be originated from a remote location with a telephone
DTMF keypad. 5 bi-directional RS232 inputs/outputs for
computer modem, remote signboard, character generator
and auxiliary panel. 6 Audio inputs on standard models.
All audio inputs and outputs are transformer isolated
from encoder-decoder board. Manual or automatic mode keypad
selectable. Automatic interruption of stereo program lines
when pre-selected header code is received while in automatic
operation for insertion of alert message on transmitter.
2 minutes of digital audio storage (5 khz). 5 programmable
relays to supply contact closures to handshake with automation
equipment or signal other equipment. 25 pin parallel printer
port for external printer to keep E.A.S. log. An auxiliary
balanced 600-ohm output through a co-axial BNC fitting
to either go directly into the FM exciter or modulate
a second transmitter. FOB: Athens, OH |
$1,750.00
|
|
EAS1-CG
|
EAS-1 with CG has a character
generator built into a cabinet that requires 5-1/4 inches
of rack space. This will put a crawl on the television
screen for a cable system or TV station. This Encoder-Decoder
is available with an optional telephone interface for
inserting an emergency message from a remote location
with a DTMF Telephone Keypad. Specifications will be emailed
to you under separate cover. FOB: Athens, OH |
$2,480.00
|
Top
Monitors
Belar Electronics
TVM-100
|
Model
|
Description
|
Price
|
|
TVM-100
|
The Belar Model TVM-100 Precision
Aural Monitor is a wide-band TV aural modulation monitor
designed to measure the total modulation characteristics
of mono as well as multi-channel television transmitters.
The TVM-100 is also used as a low-distortion, low-noise
main channel demodulator for driving audio monitor amplifiers
and audio distortion analyzers. Wide band composite outputs
are provided for Stereo,
SAP,
PRO
and SCA
monitors. Features: Split sound
and quasi-parallel detection modes; Built-in high-accuracy
digital deviation calibrator for mono and multi-channel
modes; Digital display that indicates actual deviation
in kHz, with 100 Hz resolution; Digitally selectable peak
indicator, adjustable in 1% increments from 1% to 199%
modulation, independent of modulation polarity; Semi-peak
and SAMPLE/HOLD peak metering characteristics; Measurement
of SAP & PRO injection levels directly in kHz deviation
(with optional board). FOB: Devon, PA |
$8,950.00
|
TVM-101
|
Model
|
Description
|
Price
|
|
TVM-101
|
The Belar Model TVM-101 Precision
Aural Monitor is a wide-band TV aural modulation monitor
designed to measure the total modulation characteristics
of mono as well as multi-channel television transmitters.
The TVM-101 is also used as a low-distortion, low-noise
main channel demodulator for driving audio monitor amplifiers
and audio distortion analyzers. Wide band composite outputs
are provided for Stereo, SAP, PRO and SCA monitors. Features:
Split sound detection mode; Built-in high-accuracy digital
deviation calibrator for mono and multi-channel modes;
Digitally selectable peak indicator, adjustable in 1%
increments from 1% to 199% modulation, independent of
modulation polarity; Semi-peak and SAMPLE/HOLD peak metering
characteristics. FOB: Devon, PA |
$3,950.00
|
TVMA-1
|
Model
|
Description
|
Price
|
|
TVMA-1
|
The TVMA-1, TV Wizard is a micro-processor
controlled, digital baseband TV modulation monitor/analyzer
that precisely measures peak modulation, peaks per minute,
average peak modulation, modulation density, and more.
The Wizard can operate with an existing TV modulation
monitor, or it can accept 4.5 Mhz from a good TV visual
demod. The Wizard Software (included with The Wizard)
and an IBM compatible personal computer enable real-time
graphing, logging, and remote operation through the RS-232
port. The TV Wizard features user-defined parameters and
settings for maximum flexibility. The two large UP/DOWN
menu keys are used to cycle the 16 digit alphanumeric
display to the desired menu; the UP/DOWN parameter keys
are then used to select the desired setting. The configuration
can be saved to non-volatile memory in the unit in the
event of a power loss. A built-in Audio Sentry audio failure
alarm alerts you to loss of modulation. FOB: Devon, PA |
$3,300.00
|
TVM-230
|
Model
|
Description
|
Price
|
|
TVM-230
|
The Belar TVM-230 is a digital
BTSC TV Stereo Monitor/Analyzer. Operated in conjunction
with the Belar TVM-100, TVM-101, or other wideband aural
demodulator, the Belar TVM-230 provides the measurement
capability necessary for the set-up, test, and measurement
of BTSC Stereo TV transmission systems, as well as providing
accurately decoded Left and Right channel audio outputs.
The TVM-230 digitizes the complete demodulated aural signal
and decodes the stereo multiplex portion using digital-signal-processing
techniques. Unlike analog designs, this DSP-based design
is immune to variations due to temperature or the aging
and tolerance of components. By employing linear-phase
FIR filters, the TVM-230 reduces phase distortion in the
recovered audio, providing unprecedented accuracy in measuring
modulation peaks of the Left, Right, L+R, and L-R signals.
Accurate decoding of the encoded BTSC is assured by the
on-board professional dbx expander card. FOB: Devon, PA |
$5,950.00
|
Top
All prices are list and
subject to change without notice, please
call or email for a quote
|
