Transcom

 

Continental 816R1A, 10 KW FM Transmitter

GENERAL

Rated Power Output:

  816R-1A: 10 kW

Power Consumption:

  816R-1A: 18 kW, nominal

Frequency Range:

  88 to 108 MHz, in 10 kHz steps

Frequency Control:

 

Output Impedance:

  50 ohms

Output Connector:

  3%" EIA Flange

VSWR:

  2:1, max.

Modulation Type:

  Direct carrier frequency modulation

Modulation Capability:

  :t 150 kHz deviation

Modulation Indication:

Digital LED display shows true peak level of modulating signal in 5% increments with accuracy better than +/- 2%

Exciter:

Solid-state unit with variable output of 5 to 50 watts, and self-contained harmonic filter.

RF Harmonic Attenuation:

  -80 dB, min.

Power Supply Rectifiers:

  Silicon

 MONAURAL OPERATION

Audio Input Impedance:

  600 ohms, balanced

Audio Input Return loss:

  30 dB or better

Audio Input level:

  + 10 dBm (6.93 volts peak-to-peak) @ 600

  ohms for :t 75 kHz deviation.

         Audio Frequency Response:

  :to.5 dB; flat, 25, 50 or 75 microsecond

  pre-emphasis, 20 Hz to 15 kHz

         Total Harmonic Distortion:

  0.08% max.; 20 Hz to 15 kHz (Measured

  with Spectrum Analyzer.)

Intermodulation Distortion:

  0.08% or less, 60 Hz/7 kHz 4:1 ratio

FM SIN Ratio (FM Noise):

75 dB min. below :t 75 kHz deviation @ 400 Hz, measured within a 20 Hz to 15 kHz bandwidth with 75 microsecond de-em­phasis

 

Asynchronous AM SIN Ratio (AM Noise):

55 dB RMS below carrier; reference: 100% AM modulation, full power @ 400 Hz with 75 microsecond de-emphasis, no FM         modulation

Synchronous AM SIN Ratio (Incidental AM Noise):

40 dB below carrier; reference: 100% AM modulation, full power @ 400 Hz with 75 microsecond de-emphasis, FM modulation :t75 kHz @ 400 Hz

 

WIDEBAND OPERATION

Composite Inputs:

  Balanced, unbalanced and test

Composite Input Impedance:

  5,000 ohms, nominal

Composite Input level:

  1.25 volts RMS (3.54 volts peak-to-peak)

  for :t 75 kHz deviation

Composite Amplitude Response:

  :to.1 dB, 20 Hz to 100 kHz

Composite Total Harmonic Distortion:

  0.08% max

Composite Intermodulation Distortion:

  0.08% max.; 60 Hz/7 kHz 4:1 ratio

Two SCA Inputs:

  Balanced or unbalanced

SCA Input Impedance:

  50,000 ohms, nominal

SCA Input level:

  1.25 volts RMS for :t 7.5 kHz deviation

SCA Amplitude Response:

  :to.3 dB, 40 kHz to 100 kHz

                        

STEREO OPERATION

 Most Stereo performance parameters are determined primarily by the Stereo Genera­tor used. The following parameters are influ­enced by the RF system. These specifica­tions assume that a "State-of-the-Art" Stereo Generator is used.

Stereo Separation:

50 dB min.; 50 Hz to 15 kHz. (60 dB or better, 400 Hz to 7.5 kHz typical)

Total Harmonic Distortion:

0.08% max.; 50 Hz to 15 kHz. (Measured with Spectrum Analyzer.)

Intermodulation Distortion:

  0.08% max.; 60 Hz/7 kHz, 4:1 ratio.

FM Noise:

- 72 dB referenced to 400 Hz, 75 kHz de­viation. Measured with 75 microsecond de-emphasize within a 20 Hz to 15 kHz band­width.

Linear Crosstalk - 55 dB

 

SCA OPERATION

 

Most SCA performance parameters are de­termined primarily by the SCA generator used. The following parameters are influenced by the RF System. These specifications as­sume that a "State-of-the-Art" SCA Gener­ator is used.

Crosstalk, SCA to Main and Stereo

(67 kHz and/or 92 kHz):

- 60 dB, SCA deviation 5 kHz, Main 75

  microsecond de-emphasis

Crosstalk, Main and Stereo to SCA

(67 kHz or 92 kHz):

- 50 dB, Main and Stereo 75 kHz devia­tion; SCA reference deviation, 5 kHz and 200 Hz modulation; SCA de-emphasis, 150        microsecond

Crosstalk SCA to SCA

(67 kHz and 92 kHz):

- 50 dB, SCA reference deviation 5 kHz and 200 Hz modulation frequency; de-em­phasis, 150 microsecond

 

ELECTRICAL

 

Power Source:

200 to 250 volts ac; 60 Hz, three phase; available transformer taps are 200, 210, 220, 230, 240, 250 volts ac; 50 Hz avail­able on request.

Permissible Line Voltage Variation:

:t 5% (each phase voltage variation: within 5% of the average of all three phases). Filament regulator:

+/- 1 % of optimum

OPERATING ENVIRONMENT

Operating Altitude:

7,500 ft. (2286 m) standard; optional to 10,000 It (3048 m) with modification kit

Ambient Temperature Range:

-20°C to +50°C (-4°F to + 122°F)

 

MECHANICAL SIZE,

as shown:

69" (175 cm) H

72" (183 cm) W

   28" (71 cm) D

Weight:

1875 Lb (836 kg) nominal